Optical Microscopic Imaging components for optical teaching and microscope setups. Illumination and mounting parts for university labs and research — 34 products available.
Product Description High-performance, high-precision motorized XY stage for automation, high-resolution and precise repeat positioning scenarios; Travel range: 80mm (X-axis) * 80mm (Y-axis); Repeat accuracy of ±5μm, axial error of 0.02mm, minimum resolution ≤2μm; Wide speed range:- Product Description The lifting mount can hold samples under the objective lens or experimental equipment around the objective lens. Suitable for both upright and inverted microscopes. Offers multiple device mounting options to fully utilize the large
- Product Description Adapter mounting arm with male dovetail head: Ø106.9mm, α=60°; suitable for any Olympus U-SV series XY translation stage; can be directly mounted on OPH95-LM series guide rail lifting slide kits for use. These custom
- Product Description Male dovetail: Ø1.2 inch (Ø30.5mm) Compatible with dovetail cage plates and dovetail sleeves for integration into optical systems Equipped with SM1 or C-Mount external threads for mounting scientific research cameras or SM1 threaded components
- Product Description Provides a complete set of motorized XYZ 3-axis microscopy base platform; Maximum lifting travel of 15mm with a positioning accuracy of ±5μm; Stage travel: 80mm (X-axis) * 80mm (Y-axis) with a positioning accuracy of
- FC-HX Series Microscope Phase Contrast Ring
- Product Description The combination of Ø8mm ball screw and dual linear guide rails delivers smooth motion, high positioning accuracy and excellent anti-torque performance; Bidirectional repeatability of ±2μm, repeat accuracy of ±5μm, and minimum resolution ≤1μm; Recommended
- Product Description Mechanically manually driven with bidirectional steel wire drive and ball bearings High-precision ball bearing drive for extremely smooth movement without jamming XY-axis movement range: 78mm (X-axis) * 54mm (Y-axis) Stage with a graduated scale
- Product Description Extend Oeabt series sleeves and cage products to diverse microscopy imaging systems. Connect custom-built optical systems to microscope eyepiece ports from other manufacturers. Dovetail design enables easy mechanical mounting and optical port alignment. Compatible
- MCSM Series Microscopy Port Adapters
- MCSM2-D1.5 Camera Port Adapter
- Product Description Enables vertical adjustment of microscope objectives. Focus knob controls adjustment speed for fast or high-precision movement. Linear lifting travel: 38 mm. Maximum vertical load capacity: 1 kg. Multiple pre-assembled configuration options available. This microscope
- Out of stock Product Description Precise vertical adjustment for microscope objectives. Focus knob with coarse focus and fine focus adjustment modes. Damping gear for speed control, supporting fast or high-precision movement. Linear lifting travel: 34 mm. Maximum vertical load capacity: 1
Product Description Achieves precision adjustment for the lifting of microscope lenses; The focus handwheel features two adjustment modes: coarse focusing and fine focusing; The damping gear controls the adjustment speed for rapid or high-precision movement; Lifting
Product Description Build your own episcopic illumination optical path. Magnetic door compatible with MDFM-MF2 and Olympus filter cubes. Stackable design with Ø51 mm male and female dovetails on top and bottom. Cube housing compatible with SM1- Product Description Supports custom-built epiillumination optical paths. Removable turret holds 3 filter cube assemblies, expandable up to 6. Stackable design with Ø51 mm male and female dovetails on top and bottom. Cube housing compatible with 30
- Product Description Infinity-corrected, plan (apochromatic) flat-field achromatic design. Ideal choice for magnified imaging or light focusing. Dry objective designed for air medium between objective, sample, or coverslip. Magnification ranges from 5× to 60×, delivering imaging with
- Product Description The top breadboard can be directly mounted to a 95mm main frame Dual-position slider for combining or switching DIY optical paths Built-in slider mount compatible with mounting Ø2-inch optical components with a thickness of
- Product Description Clamps samples or experimental equipment below or around the objective lens Designed for slides, petri dishes, recording chambers, patch clamps, multi-well plates and DIY inserts Suitable for upright and inverted microscopes For use with
- MT Series Microscope Objective Thread Adapters Product Description Solid brass construction M32 and SM2 external thread adapters available Realizes thread conversion between RMS/M25/M26/M27/M32/M34/M40/SM1/SM2 Compatible with most objective turrets, mounting frames, and for compatible connection of cage
- NPY Series Tilt-Rotation Stages
- Product Description Magnetic light-shielding cover, compatible with mounting micro and large cuvettes Suitable for free-space and fiber optic applications Compatible with SM1 (1.035"-40) and 30mm cage systems Cuvette size: 12.5545mm Input/output ports with Ø12.06mm mounting holes,
- Product Description Microscope objective turret with multiple objective ports RMS (0.800”-36) internal thread with 5 ports M26*0.705mm internal thread with 4 ports Precision braking mechanism for objective positioning Compatible with cage systems or lens sleeves when
- Product Description Designed as a mounting plate for heavyduty microscope stands Panel size: 260350 mm; threaded hole array pitch: 2525 mm Four countersunk holes on the bottom surface allow reverse upward mounting of components Solid construction;
