Product Description Single wheel, capable of holding 6 Ø1-inch or Ø25mm filters. SM1 internal threaded holes (1.035”-40) for mounting Ø1-inch filters up to 4mm thick. Clear aperture: Ø0.90 inches (23mm), with numbers marked on the side
Product Description Can install 12 filters (dual wheels), compatible with Ø1-inch or Ø25mm filters; SM1 internal threads in the lens holes for mounting optical components and lens sleeves; Compatible with Ø1-inch or Ø25mm filters, thickness: 4mm;- Product Description Mounting clamps for Ø25mm rods. Two clamp lengths available to meet different installation needs. Front panel features an array of M4/M6 threaded holes for mounting various optomechanical components. Rear clamp mechanism enables stable vertical
- Product Description Spacers for Ø25mm rods, constructed of non-magnetic stainless steel. Used for stacking to increase the height of rod columns. Optional styles: With M4/M6 threaded holes or Ø4mm, Ø6mm through holes. Groove design at the
Product Description Serves as a base plate for constructing experimental platforms. Breadboard dimensions: Length × Width × Thickness (unit: mm). Threaded holes: All boards feature M6 threaded holes with 25 mm spacing. Black anodized surface to- Product Description Standard Adjustment Model: Provides ±10° pitch adjustment. Precision Adjustment Model: Equipped with M6*0.5 adjusters, offering ±2° pitch and yaw adjustment with locking function. Compatible with Ø25mm rods. Pressure arm installed in the middle position:
- Out of stock
5pcs 25*25mm RGB Optical Laser Lens filter Pass Blue Reflect Red Green - Product Description Ø25mm column with solid stainless steel construction. Base compatible with fork-shaped pressure plates. Optional rod lengths: 50-75mm. M6 threaded holes at both ends for stacked installation. The Ø25mm columns are made of high-quality non-magnetic
- Product Description The board surface features a matrix arrangement with standard M4/M6 threaded holes. Hole spacing: 25 mm × 25 mm; thickness: 10.1 mm; flatness: ＜1 mm. Countersunk mounting holes are positioned clear of the threaded
- Product Description Ø25mm solid non-magnetic stainless steel support rods. Can install mirror mounts or breadboards using adapter screws of different specifications. 6mm threaded hole allows tools to provide additional force during tightening. Columnar rods offer strong
- Product Description Compatible with various Ø1-inch (25mm) optical components. Can mount optical components with a maximum thickness of 7mm. SM1 (1.035”-40) internal threads, included with 1 standard SM1 retaining ring. M4 threaded mounting hole at the
- Product Description Non-magnetic stainless steel construction; Optical adjustment frame for installation; Top M4 threaded hole, bottom M6 threaded hole; A matching hole is provided adjacent to the screw hole for precision installation assistance; suitable for high
