Product Description Compatible with Ø12mm or 12.7mm rod series. Position control via M4.5*0.2 adjusters. Fine adjustment and positioning using a 2mm hex wrench. Multiple drive installation methods: center, side-mounted, and longitudinal. Knob-lockable collar design; set screws
Product Description Compatible with Ø12-12.7mm series stainless steel rods. Equipped with a 1/4-inch-20 (M6) threaded hole at the bottom, which can be used with the PCA31-S screw base. Each rod includes a spring-loaded thumb screw for- Product Description Elevating rod holders, compatible with Ø12-12.7mm stainless steel rods. Adjustable lifting height of 8mm or 12mm via rotating the drive ring. The drive adjustment ring moves 0.5mm per full rotation. Optional bottom mounting holes:
- Product Description Available in rod lengths from Ø0.5 inches (12.7mm) to 4 inches (101.6mm); height can be increased by stacking via threaded holes. Base compatible with M-BASE-C fork-shaped pressure plates. Solid stainless steel construction with polished
- Product Description Quick-release cage plate, one-handed operation for fast assembly, disassembly and positioning of optical components; Dovetail clamp design provides smooth disassembly and clamping; SM05 (0535”-40) internal thread; Can mount optical components with Ø12.7mm and maximum
- Product Description SM05 (0.535"-40) internal and external threads Extended external thread for adjusting the position of mounted optical components Adjustable travel: 0.5 in or 1 in Holds Ø1/2 in (12.7 mm) optical components Includes one retaining
- Product Description （1）SM05 (0.535”-40) internal thread. （2）Provides a translation stroke of ±1.0mm. （3）Can mount optical components with Ø12.7mm and maximum thickness of 5.8mm. （4）Compatible with SPCM series Ø4mm support rods. （5）Compatible with 16mm cage systems and
- Product Description Mounts optical components at a 45° angle relative to the optical axis; Provides ±3° tilt and inclination adjustment; Compatible with optical components of Ø12.7mm and thickness ≥3mm; Equipped with 8 smooth holes (depth: 5.1mm),
- Product Description SM05 (0.535”-40) internal thread, supplied with 2 CSK05 retaining rings. Adjustment range: ±2.5° yaw/tilt. Can mount optical components with Ø12.7mm and thickness ≤3.6mm. Compatible with 16mm cage systems. M4 screw hole at the
- Product Description Adapter for small-beam scanning galvanometer systems; Mounting base for single-axis/dual-axis galvanometer scanning system with galvanometer scanning head motor of Ø12.7mm-Ø14mm; Mount one-dimensional/two-dimensional galvanometer systems to posts, 30mm cage systems or 66mm guide rails; Input
- Product Description Stainless steel rods with a diameter of 1/2 inch (12.7mm). Optional thread configurations: One end M4 threaded hole + one end M6 threaded hole; or one end M6 stud + one end M6 threaded
The SM-SR1 is designed for 1-inch cylindrical lenses (maximum thickness 12.7mm) and other rotation-sensitive optical components.
