Optical Post Assemblies for optomechanical alignment at Laserland. Posts, clamps and brackets compatible with cage systems and lens tubes — 29 hardware items in stock.
Product Description Compatible with Ø12mm or 12.7mm rod series. Position control via M4.5*0.2 adjusters. Fine adjustment and positioning using a 2mm hex wrench. Multiple drive installation methods: center, side-mounted, and longitudinal. Knob-lockable collar design; set screws
Product Description Ø12mm base-mounted rods with M4 thread on one end and M6 thread on the other. Suitable for space-constrained scenarios. Integrated small basic building blocks. Fix the rod base using M-BASE-SM05 fork-shaped pressure plates. These- Product Description Compatible with Ø12-12.7mm series stainless steel rods. Equipped with a 1/4-inch-20 (M6) threaded hole at the bottom, which can be used with the PCA31-S screw base. Each rod includes a spring-loaded thumb screw for
- Product Description Universal rod supports with rotating fork-shaped pressure plates and magnetic bases for easy alignment. Spring-loaded thumb screws fix the rod before final locking. 360° rotating base for convenient installation. The rod can be lifted
- Product Description Elevating rod holders, compatible with Ø12-12.7mm stainless steel rods. Adjustable lifting height of 8mm or 12mm via rotating the drive ring. The drive adjustment ring moves 0.5mm per full rotation. Optional bottom mounting holes:
- Product Description Ø25mm column with solid stainless steel construction. Base compatible with fork-shaped pressure plates. Optional rod lengths: 50-75mm. M6 threaded holes at both ends for stacked installation. The Ø25mm columns are made of high-quality non-magnetic
- Product Description Ø1.5-inch, solid non-magnetic stainless steel construction. Suitable for large rigid 3D structures. M6 threaded holes at both upper and lower ends. Central Ø6mm through hole for sufficient torque during tightening. The CFEP-S series Ø1.5-inch
- Product Description Solid stainless steel construction. Compatible with CFJP-S series rods, converting them into base-mounted rods. 3-point contact set screws and flexible clamping mechanism for significantly improved clamping stability. Counterbores on the bottom surface; contact lines
- Product Description Ø25mm solid non-magnetic stainless steel support rods. Can install mirror mounts or breadboards using adapter screws of different specifications. 6mm threaded hole allows tools to provide additional force during tightening. Columnar rods offer strong
- Product Description Mounting clamps for Ø25mm rods. Two clamp lengths available to meet different installation needs. Front panel features an array of M4/M6 threaded holes for mounting various optomechanical components. Rear clamp mechanism enables stable vertical
- CFP-CSK Cage Clamp Extension Adapter Block Product Description Extension blocks function to lengthen and extend distances; Countersunk hole design enables adaptation of coupled connecting rod clamps and guide rails; CFP-CSK is compatible with clamping mounts, allowing
- Product Description Available in rod lengths from Ø0.5 inches (12.7mm) to 4 inches (101.6mm); height can be increased by stacking via threaded holes. Base compatible with M-BASE-C fork-shaped pressure plates. Solid stainless steel construction with polished
