70*43*90mm 520nm 3W 12V G3000
70*43*90mm 520nm 3W 12V G3000
$700.00
2 in stock
2 in stock
- 16mm 30mW 5V DOE 520nm Green 5 Rings Concentric Circles Grating Laser Module Diffraction for Cake Location
- 1448 520nm 80mW 5V Line Generator Green Laser Diode Module
- 532nm Non Adjustable Focus Green Generator Line Module for Halloween Scary House Laser Swamp Laser Pond Haunted House Garden Yard Decoration
- 1450 515nm 80mW 5V 50*50 Green Light Source DOE Grid Matrix Grating Laser Module
- 2pcs IR Infrared Laser Filter Block Lens for 532nm Diode Green Laser High Transmittance
- Laser Alignment Card Double-frequency Card IR Detection Display Card 900-1100nm
- Polarizing Beam Splitter Refractor Optical Elements Cube 400-700nm Visible Light Triangular Prism
- Glass IR Filter Lens High transmittance 520-700nm Laser HB600
- 520nm Dot Module (18)
- 520nm Laser Module (43)
- Laser Modules (183)
- 520nm Line Module (11)
- 520nm Cross Module (5)
Description
704390mm 520nm 3W 12V G3000
Features
- Stage Lighting
PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog






